Design is
our passion
Silos and containers
Three RC silos for biomass with capacity 3 x 1.860m3 together with the accompanying steel structures required for a new cogeneration power unit of a power plant in Elbląg.
Building and detail design, as-built documentation and alternative building design. The designed silos had the following dimensions: the diameter: D=10m and the height H=30m, together with a RC intermediate slab for biomass (pellet from straw) with the accompanying steel structures. The structural designs were prepared between 09.2011 and 12.2012.
Silos for Pfleiderer in Wieruszow
Description: Building, detail and fabrication design of sawdust sorting plant. Following elements were designed: RC silo, bottom chamber and technological channels, conical steel roof, emergency unloading doors, steel bridges and ladders. Structural designs were prepared from 09.2015 until 03.2016.
Structural design of three RC silos for biomass.
Building design of the three RC silos with diameter of 25m and height of 15m, together with steel structures of the roofs. Silos for biomass (biofuel). Structural design prepared in December 2017.
Structural design of RC silos for sawdust at a wood production plant.
Building, detail and fabrication design of sawdust sorting plant. Following elements were designed: RC silo, bottom chamber and technological channels, conical steel roof, emergency unloading doors, steel bridges and ladders. Structural designs were prepared from 09.2015 until 03.2016.
Detail structural design of RC tank of sewage treatment plant at a factory in Legnica.
Detail design of the RC tank with diameter of 16m and height of 4m, together with accompanying steel structures. Structural design was prepared in July 2016.
Detail structural design of RC tank of sewage treatment plant at a factory in Międzyrzecz Podlaski.
Detail design of the RC tank with diameter of 16m and height of 5m with roof. Structural design was prepared in March 2016.
Detail structural design of RC tanks of an agricultural biogas plant with power capacity of 1,20MW together with pellet production plant in Szepietowo, woj. podlaskie.
Detail design of two RC tanks: with diameter and height: tank 1: D=24m and H=6m, tank 2: D=24m and H=8m, together with foundation of storage tank with diameter of D=18,5m and height of H=18,5m. Structural design was prepared in May - June 2014.
Detail structural design of RC tanks of two biogas power plants with power 1,1MW each located in Darskow and Zlocieniec, woj. zachodniopomorskie.
Detail design of two RC tanks: with diameter and height: tank No. 1: D=24m and H=8m, tank No. 2: D=30m and H=8m, together with plat storage structure for silage. The structural design was prepared in July - October 2014.
Detail structural design of a set of RC tanks of 6 biogas plants located in Lithuania
Work covered rebar designs of foundations, bottom plates and walls. Structural designs were prepared in years 2014 - 2015.
Detail structural design of a set of RC tanks of the sewage treatment plant at Dr. Oetker factory in Lebcz.
Building and detail designs of a RC tank with a diameter of D=8m and the height H=4,3m, tank covered with RC slab, sieve chamber and an accompanying technological building. The structural design was prepared in 2015.
